Holden OBD2 Scan Tool FST210 handheld OBD2 scan tool will allow you to access most of the functions and diagnose problems on your Holden like a professional. Allowing you to access engine, transmission, ABS and all other systems for faults.With special features such as Oil Light Service reset, ABS Bleeding, battery management reset & registration, DPF Regeneration, SAS etc. It is a must have tool for any Holden owner with the technology these newer cars have and if you are doing any work on them yourself or drive a-lot of KMs.With an easy to read colour screen and simple to use interface it is easy for anyone to use. Without a tool like this you cannot do your own maintenance as you cannot release brakes, prime fuel system etc. Will also work on other brands of cars for a basic OBD2 engine scan to check and clear faults and read data. The Holden OBD2 Scan Tool is an easy to use, stand alone unit that will have you scanning your vehicle like a pro within minutes. Simply, plug it into the OBD II port and the device will boot up with step-by-step instructions. This scanner has a large, easy to read colour display accompanied by a user friendly interface that requires no additional software. If you are a Holden owner then this is a must have tool to keep under the seat or in the glove box. Without a tool like this you cannot reset all service lights, change a battery, release brakes for brake change and much more*.This scanner will allow you to access most Holden vehicles modules systems including:EngineTransmissionABS/DSCAirbagsBody SystemsRadioPlus MoreSpecial Features include:ETC resetOil resetBattery registrationABS special functionAdjustment steering-angle sensorFuel Pump PrimingTransmission self-learningTyre pressure reset (TPMS)DPF regenerationEGR resetYou will be able to read/reset Holden specific codes as well as read live data from vehicle systems. It is a must have for any Holden owner as there are a number of tasks that you need to have a scan tool for. Like changing the battery or replacing the brake pads. Special FUNCTIONS for Holden OBD2 Scan Tool include:Oil, Service, Brake Service Reset FunctionReset the engine oil, Carry out the CBS Reset, Exhaust emission inspection, Coolant Service Reset, Spark plugs Reset, Brake fluid Service Reset, Micro-filter Service ResetBattery Check and RegistrationRegister the battery replacement, this is a MUST DO JOB, failing to do so may create an over charging situation, shorten the battery life and/or enable limp-home modeEPB Reset FunctionBrake Pad / Shoe changes on vehicles equipped with EPB’s (Electronic Parking Brakes) MUST be carried out using a Diagnostic Tool to correctly re-calibrate. This tool will offer you that capability on supported models. De-activate to Service Position – Replace – Re-activate.SAS Reset FunctionThe Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned. The signal is mainly used by the ABS System as part of it’s stability control function but also by other systems such as ride level control and adaptive lighting. A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly.If the Steering Angle Sensor (SAS) needs to be changed, many vehicle’s require the new sensor to be calibrated. This tool will allow you to carry out steering angle re-calibration on supported models.ABS/AIRBAG:Diagnose ABS/SRS system codes, read and clear DTCs and turn off ABS/SRS warning light, retrieves ABS/SRS ECU information, etc.Throttle Position Sensor Reset DPF Regeneration or Reset (Diesel Particulate Filter) – note that a forced/manual DPF regen using this scanner is only possible on vehicles that allow this function. Some vehicles do not allow a forced/manual DPF regen using third-party tools as the process will need to be done manually on the vehicle via user inputs.TPMS Reset Injector Coding Note that these special features and functions may not be available on all models. Please get in touch with us first to ensure supportability. Kit Includes:Main UnitOBD 16PIN CableUser ManualUSB Cable (For Software Updates)Protective Case Software Update V2.00 Software Update Guide NOTICE: PRODUCT LIMITATIONS – Read Before Purchase*Some features will not be available on each make and model. Each make and model of car is different when it comes to which functions will and won’t work on that vehicle. No one scan tool will have every function for every vehicle. This is not indicative of a ‘faulty scanner’ as these restrictions were put in by either the dealer or manufacturer of your vehicle. Please get in touch with us first to ensure compatibility when in doubt. A special software update may be required to enable some features and functions. The software update is available in Windows only. It is the responsiblity of the buyer to execute and apply the software updates. A return with a reason “the device was not updated” will be subject to our Return Policy and Terms and Conditions as this does not constitute a “faulty” or “defective” device. Video and photo proof is required for any claim of this product as not working. The video proof must clearly show and demonstrate the claim. Returns and refunds due to incompatibility (without or against OBD2 Australia advise, or refusal to execute troubleshooting/provide the required proof) will be subject to our Returns Policy/Terms.*Some features may not be accessible due to security restrictions on your vehicle. This is not indicative of a ‘faulty scanner’ as these restrictions were put on by either the dealer or manufacturer of your vehicle. As such, returns and refunds for this reason will be subject to our Returns Policy as stated on our Terms & Conditions. OBD2 Australia is not privy to what these restrictions are, as it varies per brand, model, and year of vehicle as well as the dealership it came from. This is something that is beyond our control, and as such not a case of ‘Not as described’ or ‘Unfit for purpose’ as every buyer is informed of this limitation prior to purchase.
